FAQ's

When you select more than 1 sheet of vinyl, a "Continuous Length" option appears under the quantity box, on the product you are purchasing.

Click on the check box and where possible, we will leave your vinyl on the roll as a continuous length.

This allows you to have more control over the length of vinyl you are ordering, instead of being restricted.

This section will also advise how long the vinyl will be when delivered on the roll!

Yes, it sure is!

Sticky Vinyl have had their Heat Transfer Vinyl (HTV) independently tested to Regulation (EC) No. 1907/2006 and can confirm that our HTV is free from:

- Lead (Pb)
- Cadmium (Cd)
- Phthalates (DBP, BBP, DEHP & DIBP)

All of our B-Flex Heat Transfer Vinly is Okeo-Tex Certified.

You can find all of our Heat Transfer Vinyl application instructions here.

All Sticky Vinyl HTV needs to be cut 'Shiny Side Down'.

Make sure when you are cutting Shiny Side Down that you have the 'Mirror' setting selected on your cutting machine.

Yes! Our vinyl can be used on all machines such as:

- Cricut
- Brother ScanNCut
- Silhouette Cameo

Yes, we do!

Sticky Vinyl is located in Seaford Meadows, South Australia.

When you go through the Checkout process, you will have the option to select 'Local Pickup'.

Once your order is ready for collection, you will receive an email. Please reply to the email with your preferred date and time of collection and we will advise the address to collect your order from.

Some of our vinyl has a protective film over it to protect them during manufacturing and postage. This has no impact on the use of the vinyl at all, but can make it look like there are bubbles on your vinyl.

You will need to remove this film before using the vinyl.

- Ensure you have cleaned the surface you are applying it to with rubbing alcohol first

- Do not wash the item for 12-24 hours after applying

- If your machine is not cutting the vinyl correctly, try a new blade, double-cut or use the 'more pressure' setting

- Make sure you have removed any protective film from the vinyl before cutting

- Most of our HTV is cut 'shiny side down'. Make sure you check the product information on the website before cutting

- All of our HTVs have different transfer temperatures and times. Make sure you check your vinyl on our website before applying. Each HTV has specific information listed on the website

- Do not overheat or over press your HTV when applying - stick to the instructions

- Pre-wash or iron your garment before applying, to prevent the garment from shrinking when you heat it

- Use a Heat Press Mat instead of your ironing board. This helps disperse the heat quicker, making the application nicer

- If you are layering/stacking your vinyl, only apply heat for a minimum amount of time until you reach your final layer, then complete the full press time

- Do not wash your garments for 12-24 hours after applying

- Do not iron over your HTV once on the garment- Make sure your HTV is certified harmful chemical-free (like all of ours!) ensuring it is safe to use

Yes! Sticky Vinyl products are safe to use on all of your projects. Our vinyl has been rested independently and contains no Phthalates, Lead or Cadmium.