Matte - Permanent Adhesive Vinyl - Custom Length

Add colour and a smooth matte finish to your next project with our Matte Permanent Adhesive Vinyl. Available in a huge range of colours, this durable vinyl is ideal for personalising glasses, bottles, frames, tiles and more.

Whether you’re creating a small decal, a set of matching labels or a larger design, choose individual sheets or request a continuous length to suit your project.

Choose individual sheets or continuous length

Individual sheets
Each sheet measures 30.5 cm × 30.5 cm (12″ × 12″). Select your colour and the number of sheets you need, leaving the ‘Continuous Length’ checkbox unticked.

Continuous length
For a longer piece, select your colour, enter a quantity of two or more sheets, and tick the ‘Continuous Length’ checkbox beneath the quantity selector before adding the product to your cart.

Each quantity unit adds 30.5 cm of length, while the width remains 30.5 cm. Where possible, we’ll supply your selected quantity of the same colour as one continuous piece.

Cutting and transfer recommendations

For a Cricut Maker 4, start with the ‘Permanent Vinyl’ setting. Apply your design using either standard grip transfer tape or medium tack application tape.

Always complete a small test cut first. Results can vary depending on your machine, blade condition and design, so adjust your settings if needed.

How to cut and apply

1. Cut your design: Place a piece of vinyl sized to fit your cutting mat with the paper backing facing down and the matte coloured side facing up. Cut your design without mirroring.
2. Weed: Remove the excess vinyl, leaving only the parts of your design you want to apply.
3. Add transfer tape: Cover your design with standard grip transfer tape or medium tack application tape. Burnish firmly with a scraper.
4. Remove the backing: Turn the design face-down and slowly peel the paper backing away, leaving the vinyl attached to the transfer tape.
5. Apply your design: Position it on a clean, dry, smooth surface. Burnish firmly, then slowly peel the transfer tape back at a low angle, leaving your vinyl design in place.