HighLift 3D Smooth Metallic Puff - Heat Transfer Vinyl

Elevate your design with an added dimension of sophistication using our HighLift 3D Smooth Metallic Puff heat transfer vinyl. This PU film offers a puffed-up effect, transforming simple artwork into something exceptionally elegant.

Offered in convenient 25cm x 30.5cm sheets or as continuous length rolls, our HighLift 3D Smooth Metallic Puff Vinyl allows precise customisation to fit your design needs. 

Can't find the colour you are looking for? Check out more Puff Colours here.

For best results, we recommend a two-step press:

• Press at 150°C for 3-4 seconds
• Hot peel off the PET carrier
• Then cover with a Teflon sheet and press again at 150°C for 10-15 seconds

Tips for applicaiton:

• Preheat your garment to remove any moisture by pressing for 10 seconds, then allowing it to cool before applying the heat transfer vinyl
• Apply 'high pressure' when using your heat press (note, this will not work with a standard iron)
• Ensure you have a hard, smooth surface under the fabric you are applying the vinyl to, such as a timber board

We cut this vinyl using a Cricut Maker 3, with the 'Everyday Iron-on' setting, and 'more' pressure.