Puff Glow in the Dark - Heat Transfer Vinyl

Our Puff Glow in the Dark Heat Transfer Vinyl Sheet will add en exciting 3D glow to your next project.

Our cuttable Heat Transfer Vinyl is durable and ideal for producing a range of products, including logos, letters, numbers and other custom designs. 

Offered in convenient 25cm x 30.5cm sheets, our Glitter Puff Vinyl allows precise customisation to fit your design needs. For those larger projects or when continuity is key, we also provide the option to purchase it on a continuous roll, cut in increments of 30.5cm to suit your specific requirements.

Instructions for a Perfect Puff Effect:

Use a hard surface underneath your garment, such as a wooden board. Apply a firm pressure.

1. First Heat Press: Set your heat press to 150°C and apply for 3-4 seconds.
2. Remove the PET Carrier: Carefully hot peel off the PET carrier film from your design.
3. Second Heat Press: Apply a second fire pressure heat press at 150°C for 8 seconds to solidify the puffed effect, covering your vinyl design with a Teflon sheet.

Sticky Vinyl recommends the following:

• Do not wash your custom-made items until at least 24 hours after applying the HTV
• Where possible, turn your item inside out when washing
• Gentle machine or hand wash
• Do not use a hot wash 
• Do not tumble dry
• Cut this vinyl 'colour/print side down' on the 'mirror' setting
• Do not iron directly onto the transferred vinyl. Iron your garment inside out
• We cut this using the 'Everyday Iron On' setting