Puff Rainbow - Heat Transfer Vinyl

Introducing our Puff Rainbow Heat Transfer Vinyl - a textured vinyl sheet measuring 30.5cm x 25cm (12" x 9.84") or continuous length.

When applied, it creates a stunning 3D effect that adds dimension to your designs.

Crafted with durability in mind, this cuttable vinyl is perfect for creating custom designs such as logos, letters, and numbers.

Whether you prefer sheets or continuous length, we've got you covered. Simply select the 'continuous length' check box under the number of sheets and order two or more sheets to ensure your vinyl arrives in a seamless length whenever possible.

Make your designs pop with our Puff Heat Transfer Vinyl today!

Can't find the colour you are looking for? Check out more Puff Colours here.

Instructions for a Perfect Puff Effect:

Use a hard surface underneath your garment, such as a wooden board. Apply a firm pressure.

1. First Heat Press: Set your heat press to 150°C and apply for 3-4 seconds.
2. Remove the PET Carrier: Carefully hot peel off the PET carrier film from your design.
3. Second Heat Press: Apply a second fire pressure heat press at 150°C for 8 seconds to solidify the puffed effect, covering your vinyl design with a Teflon sheet.

Sticky Vinyl recommends the following:

• Do not wash your custom-made items until at least 24 hours after applying the HTV
• Where possible, turn your item inside out when washing
• Gentle machine or hand wash
• Do not use a hot wash 
• Do not tumble dry
• Cut this vinyl 'colour/print side down' on the 'mirror' setting
• Do not iron directly onto the transferred vinyl. Iron your garment inside out
• We cut this using the 'Everyday Iron On' setting