Matte Permanent Adhesive Vinyl

Make personalised glasses, bottle labels, framed designs and signs with a smooth matte finish. Our Matte Permanent Adhesive Vinyl is available in individual sheets or continuous lengths, so you can choose what suits your project.

Matte - Permanent Adhesive Vinyl

What is it?

Learn more about Matte Permanent Adhesive Vinyl.

This is a self-adhesive vinyl with a matte surface and a permanent adhesive backing. Cut your design, weed out the unwanted pieces and use transfer tape to apply it to a suitable smooth surface. It sticks with pressure and does not need heat pressing.

Use cases

When you should and shouldn't use Matte Permanent Adhesive Vinyl.

  • Ideal for: Names and decorative decals on the outside of suitable glasses and bottles.

  • Ideal for: Labels for smooth containers and storage jars.

  • Ideal for: Decorative designs on frames, tiles and suitable smooth craft blanks.

  • Ideal for: Lettering and simple graphics on indoor signs.

  • Not the best for: Using it on clothing that will be worn and washed. Choose a suitable HTV instead.

  • Not the best for: Applying permanent vinyl to walls or delicate paint when clean removal matters.

  • Not the best for: Expecting reliable adhesion on raw timber, dusty, oily, heavily textured or flexible surfaces.

  • Not the best for: Using it inside food containers, on drinking rims or where food will touch the vinyl.

  • Not the best for: Assuming "permanent" means dishwasher-safe, impossible to remove or rated for every outdoor application.

Steps to use

How to use Matte Permanent Adhesive Vinyl.

  1. 1

    Prepare the surface

    1. Choose a smooth, clean, dry surface and test a small piece for adhesion. Use a cleaner suited to the blank (often isopropyl alcohol); some plastics and finishes can be damaged by strong solvents.
    2. Let any paint or sealant fully cure before applying vinyl.

  2. 2

    Set up your design

    1. Measure your project and size the artwork. Leave Mirror off for a normal front-facing decal.
    2. Keep very small lettering and fine details manageable for your cutter and the finished surface.

  3. 3

    Load and test cut

    1. Place the vinyl on a suitable cutting mat with the backing/carrier sheet down and the matte colour facing up.
    2. On our Cricut, we start with the Premium Vinyl setting. Do a small test cut first: the vinyl should cut cleanly while the paper backing stays intact. Adjust for your machine and blade.

  4. 4

    Cut and weed

    1. Cut the full design. Remove the surrounding vinyl and unwanted pieces inside letters, leaving the design on the paper backing.

  5. 5

    Add transfer tape

    1. Start with Standard Grip transfer tape and test that it both lifts and releases the design. Apply it over the vinyl and rub with a scraper.
    2. Turn the piece over and slowly peel away the backing/carrier sheet. If any detail stays behind, rub over it again before continuing.

  6. 6

    Apply and finish the decal

    1. Check the position, then lower the design onto the surface gradually. Smooth from the centre outwards to help avoid bubbles.
    2. Rub over the design through the tape, then peel the tape back slowly, keeping it close to the surface.
    3. Check that the edges are down and leave the item undisturbed while the adhesive develops its bond.

Remember

  • For decorated drinkware, hand wash gently. Avoid soaking, abrasive scrubbing and the dishwasher. Keep decorations clear of the drinking rim.
  • Let the final product sit for at least 24 hours before using it, to allow the adhesive glue backing to fully cure.

Featured Products

Shop for Matte Permanent Adhesive Vinyl!

View All Products

FAQs

View frequently asked questions (FAQs) about Matte Permanent Adhesive Vinyl.

  • Do I need heat to apply it?

    No. This vinyl has a pressure-sensitive adhesive. Apply it to a suitable surface and rub it down firmly. Do not press it onto clothing as a substitute for HTV.

  • What cutting setting should I use?

    We use Premium Vinyl on our Cricut. Treat that as a starting point and test first, as machines and blades vary. If the backing cuts through, reduce pressure; if the vinyl will not weed cleanly, check that the blade is sharp and the correct blade type, or adjust the cutting pressure gradually.

  • Does a matte finish mean the vinyl is removable?

    No. Matte describes how the surface looks. This product has a permanent adhesive. Choose a vinyl specifically labelled removable when removal is part of the project (eg. Oracal 631).

  • Can I use it on a mug or drink bottle?

    It can be used for exterior decoration on suitable smooth surfaces. Keep it away from drinking rims and food-contact areas, and hand wash gently. A permanent adhesive is not dishwasher-safe.

  • Why is my vinyl not sticking?

    Check that the surface is dry and free from oil or residue. Rough textures, some plastics and coatings can be difficult to bond to. Also check that your transfer tape is releasing the vinyl; stronger tape can pull a newly applied design back up.

  • Can I print onto this vinyl?

    No, this is a cuttable coloured vinyl. For an inkjet-printed design, choose a product specifically labelled printable adhesive vinyl and follow its own printing and care instructions.

Related guides

View other related guides